Clearing the Memory EPROM on the Deluxe 12/22 & 62 Units

 

Turn the igntion switch to the ON/RUN position and secure the BLUE wire from the 18 pin harness to ground. Pull the fuse from the RED wire on the 18 pin harness and wait for 10 seconds. Place the fuse back into the holder, the parking lights (3) times. Now try the remote and it should not respond. Unplug the 18 pin harness and wait for 30 seconds. Now plug the unit back in and remove the BLUE wire from ground. Press any button on the remote to reprogram your remote to the unit.

Up ] Clearing E-Prom on RS-602E ] Type C - Door Locks ] After Market Actuators ] Trunk Popup Actuators ] E-prom 791 bypass ] E-prom all remote starters ] ERASING MEMORY ON PRO ALARMS ] Relay Harness Test ] Troubleshooting the 1402 ] Troubleshooting the 721 module-Passlock 1 ] Troubleshooting the 721 module-Passlock 2 ] Troubleshooting the 781 module-VATS ] Troubleshooting the 781 module-Passlock 1 ] Troubleshooting the 781 module-Passlock 2 ] Troubleshooting the 781 module-Transponder ] Tach Setting for Remote Starters ] RS1100, 1200 and 1300 Test ] [ Clearing Memory EPROM on Deluxe Units ]