TROUBLESHOOTING GUIDES

Deluxe 500 Remote Starter Install Video
Click here to view our instructional video

ADDENDUM

If you have an RS1100 or RS1200 and your vehicle runs for several seconds, shuts off, restarts, runs, and shuts off again, perform the following step: Connect the Black/White tach wire (from the 16 pin plug) to the heavy gauge White Ignition 1 wire and program the unit for Tach Mode (bottom of page 19).

IF YOUR REMOTE STARTER IS CLICKING AND/OR FLASHING THE PARKING LIGHTS AND IS NOT RESPONDING TO THE REMOTE, IT IS IN SAFE MODE AND NEEDS TO BE INITIALIZED BY DOING THE FOLLOWING:

If you have a 4 button remote, you must ground the black/blue hood pin wire (raise hood if hood switch is installed). Apply 12volts to blue/black brake wire (press and hold brake pedal if wire is installed). Press and hold any button on your remote until clicking and flashing stops. Unit will now respond to the remote. Remove ground from hood pin wire and voltage from brake wire. If you have a 2 button remote, hold brake and press any button on the remote until clicking and flashing stops.

These files are provided for quick reference. You can view them in your browser and print for personal use.

Remote Starter-Relay Harness Test

RS1100(114),1200 and 1300 Starter Test

Testing Resistance Settings for the Passlock 2 Systems

Troubleshooting 721 bypass for VATS (Passkey) systems

Troubleshooting 721 bypass for Passlock I systems

Troubleshooting 721 bypass for Passlock II systems

Troubleshooting 781 bypass for VATS (Passkey) systems

Troubleshooting 781 bypass for Passlock I systems

Troubleshooting 781 bypass for Passlock II systems

Troubleshooting 781 bypass for Transponder systems

Troubleshooting for all DIY alarms